Follow @MorganCeramics
MTC Diamonex is part of
Morgan Technical Ceramics
Specializing in Diamond Like Carbon Coatings
Home
Materials
Products
Resources
News & Events
About us
Sales enquiries
You are here:
Home
› Get a Quote
Site search
Get a Quote
Contact Details
Contact Details
Customer Name
Customer Address
Attn.
Tel
Fax
Email
Preferred Method to Contact You
-- select --
Email
Telephone
SMS
Post
Application Description Information
Application Description Information
Purpose of DLC Coating
Wear Protection
Abrasion
Chemical Protection
Friction Reduction
Hardness
Electrical Isolation
Hydrophobic -or-
Hydrophilic Surface
Other
If 'other' or 'chemical protection', please provide detail
Scope
Scope
Replacement Coating
-- select --
Yes
No
Is this project budgeted?
-- select --
Yes
No
What Other Technology Alternatives are you Considering?
Part Environment
Part Environment
Describe the application the coating will be used in, including materials that will be in contact with the coated area and if this is sliding or rolling contact
Material (to contact coated part) Information
Material (to contact coated part) Information
Material type in contact with coated part?
Hardness of mating piece in contact with coated part?
Surface finish of mating piece in contact with coated part?
What is the range of operating temperatures the coated part will be exposed to during use?
What environment will the coated part be exposed to when used?
-- select --
Vacuum
Air
Water
Oil
Acid
Caustic
Other
If option was other, please describe
Material Information (contd.)
Material Information (contd.)
Contact Pressure
Sliding Speed
Lubrication
-- select --
Yes
No
If yes, define composition
Other
Part to be Coated Information
Part to be Coated Information
Quantity of parts to be coated
Forecasted production requirements (parts per month/year)
Composition & hardness of part
Surface finish of part to be coated
Coating exposure temperature: Limited (max.temp. Part can be subjected to during coating procedure)
-- select --
20 - 150 degrees
150 - 250 degrees
250 - 450 degrees
above 450 degrees
Drawing/Sketch of Part
Any special test coupons required in addition to the parts? Will these be provided by the customer?
Coating Information
Coating Information
Coating thickness uniformity (+/- 15% typical)
Electrical conductance
Other Information
Coating Information (contd.)
Coating Information (contd.)
Target thickness (if known). Quote will be based on best effort for a 2 micron deposition unless indicated otherwise.
Min (µm)
Max (µm)
Testing requirements after coating?
-- select --
Thickness
Hardness
Other
If option was other, please describe
Inspection requirements after coating?
Does the coating require a transmission specification?
Cleaning Specifications
Cleaning Specifications
Cleaning Specifications
All surfaces including holes and orifices should be free of solvents/oils used during manufacturing
Target areas much be stain and blemish free
Target areas should be as smooth as possible
Other
